The most recent issue of the National Board BULLETIN contains two errors readers should note. Both occur in “Common Misconceptions When Applying Code Rules, Part II,” written by Senior Staff Engineer and Training Specialist Patrick Nightengale.

 

Mr. Nightengale’s reference on page 7 (end of first paragraph) to “paragraph UW-33” should read “paragraph UW-3.”

 

On page 8, in Table UW-35(d), Customary Units, in “Over 1/2 to 1, incl.,” “3/32” in “Category B & C Butt Welds” should read “3/16.”

 

These errors have been corrected and can now be found in the electronic issue of the BULLETIN, which can be accessed HERE.